Cella®flex & Cella®starr

Better look, top quality. You will get a new look with a stable visual apperance.
Simple upgrade. It is the simplest way to upgrade your current solution.
Easy to manipulate & install. Very light, classic zip fastening. It can´t be easier.
Individual solutions. Every product is aligned to a specific tank.

Cella®flex

The Cellaflex jacket serves as outer layer for foam-in-place tanks (directly isolated tanks as well as Cella®Cool). Their purpose is to add a nice look to existing insulations. The jacket also increases firmness and visual appearance. It consists of 2 layers. PVC top film and inner PU soft foam.

 

Furthermore, tolerances can be absorbed due to the elasticity of the foam. The hole cutting in the Cellaflex jacket can be done individually. The cut-outs for connection pipes can be covered by plastic rosettes. Fastening to a tank works with a classic ZIP.


Cella®starr

The main purpose of the Cella®starr jacket for foam-in-place tanks (directly insulated tanks) is to add an outer layer which provides additional significant resistance and a nice look to existing insulation. It is considered an alternative to conventional soft jackets.

 

The jacket is made from 1 layer of impact-resistant polysterene. The holes in the Cellastarr jacket are made on individual demand. An extruded closing slat and covering slat is used as insulation closure and fastening to the tank. Deliveries may be made with rosettes and thermoformed lid.


The construction is as follows:

1 Outer layer of Cella®flex, made of PVC and laminated to the soft 5 mm PU foam.
2 Inner layer of Cellaflex coating, high quality PU foam.
3 Classic ZIP fastening.
4 Holes for Connection pipes.
5 Foam-in-place tank
6 Rosettes and caps
7 Top lid

The important facts:

 

surface PVC film
foam thickness 5 mm
fastening classic ZIP
workers for installation 1
special aids or tools no need
costum adjustments yes

grainy PVC grainy PVC
different colours different colours
1 2 3 4 5 6 7

4 easy steps

With this 4 easy steps, 1 worker can install the jacket in just a few minutes:

Prepare all parts 1 Prepare all parts
Install & secure the jacket 2 Install & secure the jacket
Cover the top 3 Cover the top
Finish all the Details & connections 4 Finish all the Details & connections

The construction is as follows:

1 The main body of Cellastarr coating is made of impact-resistant poystyrene.
2 Closing slat or hook and loop fastener
3 Covering slat (not for hook and loop)
4 Individual holes.
5 Foam-in-place tank.
6 Rosettes and caps
7 Top lid insulation as insulating cover.

The important facts:

 

surface PS
thickness 1 mm
fastening closing slat or hook and loop
workers for insulation 1
special aids or tools no need
costum adjustment yes

 

grainy PS grainy PS
smooth PS smooth PS
different colours different colours
costum print costum print
1 2 3 4 5 6 7

4 easy steps

With this 4 easy steps, 1 worker can install the jacket in just a few minutes:

Prepare all parts 1 Prepare all parts
Install & secure the jacket 2 Install & secure the jacket
Cover the top, finish the details 3 Cover the top, finish the details
If necessary, install the covering slat (not for hook and loop) 4 If necessary, install the covering slat (not for hook and loop)